Identification of best available techniques in the seafood industry: a case study

A Best Available Techniques (BAT) analysis of a mussel canning processing facility in northwest Spain was undertaken to investigate potential cleaner production and efficiency improvements. Potential techniques were identified from the literature and from our experience in the seafood sector. BATs were then assessed for possible implementation in a mussel canning facility. This work describes, in considerable detail, the advantages and disadvantages of the techniques discussed.     

Spatial and temporal variations in inhalable CuZnPb aerosols within the Mexico City pollution plume

We report on the CuPbZn content of PM10 and PM2.5 samples collected from three sites (urban T0, suburban T1 and rural T2) during the Mexico City MILAGRO campaign of March 2006. Daytime city centre concentrations of summation operator CuZnPb(PM10) were much higher (T0 > 450 ng m(-3)) than at the suburban site (T1 < 200 ng m(-3)). Rural site (T2) summation operator CuZnPb(PM10) concentrations exceeded 50 ng m(-3) when influenced by the megacity plume but dropped to 10 ng m(-3) during clean northerly winds. Nocturnal metal concentrations more than doubled at T0, as pollutants became trapped in the nightly inversion layer, but decreased at the rural site. Transient spikes in concentrations of different metals, e.g. a "copper event" at T0 (CuPM10 281 ng m(-3)) and "zinc event" at T1 (ZnPM10 1481 ng m(-3)) on the night of March 7-8, demonstrate how industrial pollution sources produce localised chemical inhomogeneities in the city atmosphere. Most metal aerosols are <2.5 microm and SEM study demonstrates the dominance of Fe, Ti, Ba, Cu, Pb and Zn (and lesser Sn, Mo, Sb, W, Ni, V, As, Bi) in metalliferous particles that have shapes including spherical condensates, efflorescent CuZnClS particles, cindery Zn, and Cu wire. Metal aerosol concentrations do not change in concert with PM10 mass, which is more influenced by wind resuspension than industrial emissions. Metalliferous particles can induce cell damage, and PM composition is probably more important than PM mass, with respect to negative health effects, so that better monitoring and control of industrial emissions would likely produce significant improvements in air quality.     

Evaluation of the Spanish hot dip galvanising sector as a source of polychlorinated dibenzo-p-dioxins and polychlorinated dibenzofurans

A survey to estimate the polychlorinated dibenzo-p-dioxins (PCDDs) and polychlorinated dibenzofurans (PCDFs) emissions of Spanish hot dip galvanising sector was carried out during 2002. This investigation is the first presenting Spanish experimental data related to this industrial sector. Three different matrices: flue gas, ash and filter dust were tested to quantify the PCDD/Fs generated during the galvanising process. The organic source of PCDD/F formation could be from the insufficient degreasing o from inhibitors or additives used in the pickling steps such as quinoline, isoquinoline, 8-methylquinoline or polyether phosphoric acid. Low levels PCDD/Fs were achieved in air emissions when air control devices are used. On the contrary, filter dusts are highly contaminated; indicating that the absence of air control devices would increase the risk of fugitive emissions. Homologue profiles and Principal Component Analysis demonstrate there are differences in the formation mechanisms in the bath zone (ashes) compared to the stack location (filter dusts and air emissions), related to the de novo synthesis and reaction time. The annual PCDD/F emission to the atmosphere for this sector during 2002 has been estimated in 0.023g I-TEQ. The emission factor of plants with air control devices has been calculated at 0.030microg I-TEQ/ton of galvanised steel.     

Study of biological stabilization processes of cattle and poultry manure by thermogravimetric analysis and (13)C NMR

The biological stabilization process of cattle and poultry manure was studied using thermogravimetric analysis and (13)C nuclear magnetic resonance. The stabilization processes carried out were composting, anaerobic digestion and a mixed process (partly aerobic, partly anaerobic). It was observed from the analyzed samples that the biological stabilization processes reduce the volatile content of the bio-wastes and increase the degree of aromaticity. The stabilization of cattle manure by means of aerobic processes was able to further oxidize and enriched in aromatic compounds the bio-waste when compared with the digestion process. On the other hand, the stabilization of poultry manure resulted in a greater aromatization under the digestion process. Stabilized samples with a high degree of aromaticity presented a lower volatile content accompanied by a reduction in the intensity of the differential thermogravimetry peak registered under an inert atmosphere, indicative of the thermal decomposition of the organic matter. The thermal decomposition of all the analyzed materials (fresh and stabilized samples) commenced at around 200 degrees C but for the digested poultry manure, which decomposition initiated close to 250 degrees C. All stabilized samples yielded a lower degree of volatilization to that one observed in fresh samples.     

Distribution and mobilization of U, Th and 226Ra in the plant-soil compartments of a mineralized uranium area in south-west Spain

The activity concentrations of natural uranium isotopes (238U and 234U), thorium isotopes (232Th, 230Th and 225Th) and 226Ra were studied in soil and vegetation samples from a disused uranium mine located in the Extremadura region in the south-west of Spain. The results allowed us to characterize radiologically the area close to the installation and one affected zone was clearly manifest as being dependent on the direction of the surface water flow from the mine. The activity concentration mean values (Bq/kg) in this zone were: 10,924, 10,900, 10,075 and 5,289 for 238U, 234U, 230Th and 226Ra, respectively, in soil samples and 1,050, 1,060, 768 and 1,141 for the same radionuclides in plant samples. In an unaffected zone, the activity concentration mean values (Bq/kg) were: 184, 190, 234 and 7251 for 235U, 234U, 230Th and 226Ra, respectively, in soil samples and 28. 29, 31 and 80 in plant samples. The activity concentrations obtained for 232Th and 228Th showed that the influence of the mine was only important for the uranium series radionuclides. The relative radionuclide mobilities were determined from the activity ratios. Correlations between radionuclide activity concentrations and stable element concentrations in the soil samples helped to understand the possible distribution paths for the natural radionuclides.     

Natural resource dependence and the accumulation of physical and human capital in Latin America

In a simultaneous model of human and physical capital accumulation for 17 Latin American countries from 1975 to 2004, we show that overall resource dependence has no significant direct effect on physical and human capital. When disaggregating the natural resource variable into sub-categories, we find that petroleum export dependence has a significant positive direct effect on physical capital, but a significant negative direct effect on human capital. Agricultural export dependence shows a significant negative direct effect on physical capital. Petroleum exports have a long run positive effect on physical capital but a negative long run effect on human capital. Agricultural exports have a negative long run effect on physical and human capital.     

Optimization of conventional Fenton and ultraviolet-assisted oxidation processes for the treatment of reverse osmosis retentate from a paper mill

According to current environmental legislation concerned with water scarcity, paper industry is being forced to adopt a zero liquid effluent policy. In consequence, reverse osmosis (RO) systems are being assessed as the final step of effluent treatment trains aiming to recover final wastewater and reuse it as process water. One of the most important drawbacks of these treatments is the production of a retentated stream, which is usually highly loaded with biorecalcitrant organic matter and inorganics; and this effluent must meet current legislation stringent constraints before being ultimately disposed. The treatment of biorefractory RO retentate from a paper mill by several promising advanced oxidation processes (AOPs) - conventional Fenton, photo-Fenton and photocatalysis - was optimized considering the effect and interaction of reaction parameters; particularly using response surface methodology (RSM) when appropriate (Fenton processes). The economical cost of these treatments was also comparatively assessed. Photo-Fenton process was able to totally remove the COD of the retentate, and resulted even operatively cheaper at high COD removal levels than conventional Fenton, which achieved an 80% reduction of the COD at best. In addition, although these optimal results were produced at pH=2.8, it was also tested that Fenton processes are able to achieve good COD reduction efficiencies (>60%) without adjusting the initial pH value, provided the natural pH of this wastewater was close to neutral. Finally, although TiO(2)-photocatalysis showed the least efficient and most expensive figures, it improved the biodegradability of the retentate, so its combination with a final biological step almost achieved the total removal of the COD.